OLRC Track / Racing

The Ultimate High-Grip Experience. Pure RCP Performance.

Stop fighting the floor and start chasing the podium. OLRC Raceway features a professional-grade RCP Track layout, designed specifically for the unique demands of 1/28 scale racing. Our surface provide the high-bite traction required for the fastest MR-04 and Reflex Racing kits. Combined with our LiveRC/LiveTime transponder system, you get real-time lap data to shave every tenth off your personal best.

No Excuses. Just Racing.

Think you’re the fastest on the 805? Prove it in our Friday Night Box Stock. We strip away the high-end motors and custom carbon chassis to focus on what matters most: the driver. With strictly enforced PNWC rules, this is the most level playing field in Mini Z scale racing. It’s door-to-door, bumper-to-bumper action where every tenth of a second is earned on the wheel, not in the pit area.

Classes / Rules

We Follow PNWC Rules.

Motor:
Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety switch.

Chassis:
Kyosho MR03 RWD and MR04 RTR

Wheels:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm.
Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed.
No tire insert use. Traction compounds NOT allowed on tire or on race surface.
Tire installed to wheel maximum diameter 25.5mm.
Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.
If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties
that apply.

Electronic & Transmitter:
Kyohso original from RTR, NO any modification.
Gyro and Receiver build in Gyro is not allowed.

Gear Ratio:
Fixed 9T Pinion with Stock Gear Diff. Pinion - Kyosho or PN 400329 MR2709 only.
Wheelbase:
98mm to 102mm

Body:
Kyosho original AutoScale body, white body, Jomurema GT01 body and TRP Scale body, PN Racing
Concept C9 ABS Body, all parts must be original from that body, limited wheel clearance modification
allowed.
Lexan Window and Lexan Roof allowed. Minimum weight limit 24g.

Batteries:
Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and
Silver Horse 800, AAA NiMH 4pcs only.

Option Parts:
Kyosho or PN Ball Bearing, Front Spring, wheel nut and T-Plate only.
Modifications:
It must be run in stock configuration.

Motor:Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety switch.

Chassis:Kyosho MR03 RWD and MR04 RTR

Wheels:All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm.
Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.

Tire:Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed.
No tire insert use. Traction compounds NOT allowed on tire or on race surface.
Tire installed to wheel maximum diameter 25.5mm.
Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.
If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties
that apply.

Electronic & Transmitter:Kyohso original from RTR, NO any modification.
Gyro and Receiver build in Gyro is not allowed.

Gear Ratio:Fixed 7T Pinion with Stock Gear Diff. Pinion - Kyosho or PN 400329 MR2709 only.
Wheelbase:
90mm to 94mm

Body:Kyosho original AutoScale body, white body, limited wheel clearance modification
allowed.

Batteries:Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and
Silver Horse 800, AAA NiMH 4pcs only.

Option Parts:Kyosho or PN Ball Bearing, Front Spring, wheel nut and T-Plate only.
Modifications:
It must be run in stock configuration.

Motor:Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety switch.

Chassis:Kyosho MR03 RWD and MR04 RTR

Wheels:All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm.
Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.

Tire:Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed.
No tire insert use. Traction compounds NOT allowed on tire or on race surface.
Tire installed to wheel maximum diameter 25.5mm.
Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.
If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties
that apply.

Electronic & Transmitter:Kyohso original from RTR, NO any modification.
Gyro and Receiver build in Gyro is not allowed.

Gear Ratio:Fixed 7T Pinion with Stock Gear Diff. Pinion - Kyosho or PN 400329 MR2709 only.
Wheelbase:
86mm to 90mm

Body:Kyosho original AutoScale Porsche 911/934 body, white body, limited wheel clearance modification
allowed.

Batteries:Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and
Silver Horse 800, AAA NiMH 4pcs only.

Option Parts:Kyosho or PN Ball Bearing, Front Spring, wheel nut and T-Plate only.
Modifications:
It must be run in stock configuration.

Chassis:
Kyosho MR03, MR04, PNR2.5W.
98mm wheel base only.

Body:
Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo, Silver Horse R8 body, PN Racing
Concept C9 ABS Body and Radbody Piranha Plastic Body #RAD012 only.
LeMans body NOT allowed, full windshield and window must be installed, except for clearance,
Lexan Window and Lexan Roof with original shape design allowed.
Minimum weight limit 24g.

Motor:
PN Racing 3500kn Unsensored, Marka Racing 3500kv Unsensored, Silver Horse 3500kv Unsensored.

Gearing
Fixed Gear ratio 64 Pitch 16 Pinion 53T
Spur Gear.

ESC:
Kyosho ASF VE VE Pro MR03S RWD, MR04 RTR ESC, EVO and PN 16A ESC (#500807 and
#500807A).
Gyro and Receiver build in Gyro is not allowed.
Battery:
Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No
other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery
for transponder allowed.
Option Parts:
Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print performance
parts and prototype parts not allowed.
Allowed 3D Print Transponder Holder, Body Side Clips, Body Front Mount, ESC Holder and Front
Bumper.

Wheel:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm.
Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed.
No tire insert use. Traction compounds NOT allowed on tire or on race surface.
Tire installed to wheel maximum diameter 25.5mm.
Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution.
If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties
that apply.

Minimum Weight:
Whole car with everything 160g.