PNWC 2024 Rules

Novice Box Stock Class

Motor:
Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety
switch.
Chassis:
Kyohso MR03S, MR03S2 and MR03 RWD.
Wheels:
Kyosho or PN plastic wheels, Front 8.5mm x 20mm, Rear 11mmx20mm, offset must fit inside of the
body.
Tire:
Kyosho or PN rubber tire only
Traction Compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be
cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the
driver will be subject to any penalties that apply. Please address any questions concerning tire
cleaners at the drivers meeting.
Electronic & Transmitter:
Kyohso original from RTR, NO any modification.
Gyro and Receiver build in Gyro is not allowed.
Gear Ratio:
Fixed 9T Pinion with Stock Gear Diff. Pinion - Kyosho or PN 400329 MR2709 only.
Wheelbase:
90mm to 102mm
Body:
Kyosho original AutoScale body, white body, Jomurema GT01 body and TRP Scale body, PN Racing
Concept C9 ABS Body, all parts must be original from that body, limited wheel clearance modification
allowed.
Batteries:
Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750, PN HP900 and
Silver Horse 800, AAA NiMH 4pcs only.
Option Parts:
Kyosho or PN Ball Bearing, wheel nut and T-Plate only.
Modifications:
It must be run in stock configuration.

2WD Stock Class


Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MRC MR01 and PNR2.5W.
90mm-98mm wheel base only.
Body:
Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo, Silver Horse R8 body and PN
Racing Concept C9 ABS Body only.
LeMans body NOT allowed, full windshield and window must be installed, except for clearance,
Lexan Window and Lexan Roof with original shape design allowed.
Motor:
PN Brushless Sensorless V4 3500kv #164435, all motor comes with standard 14.5
rotor, and all motor will inspect by motor checker machine, make sure all motor running on same
performance, and all motor will be sealed with security label, if the label removed or broken will be
VOID.
Fixed Gear ratio 64 Pitch 16 Pinion (#416416WC Blue, #426416WC Blue, #MR2716WC Blue) / 53T
Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow or #RX2853WC Yellow) ONLY.
ESC:
Kyosho ASF VE VE Pro MR03S RWD and EVO, PN 16A ESC (#500807 and #500807A).
Gyro and Receiver build in Gyro is not allowed.
Battery:
Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No
other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery
for transponder allowed.
Option Parts:
Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts
and prototype parts not allowed.
Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover and front bumper allowed.
Wheel:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims
must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design
wheel and 3D print wheel not allowed.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
Whole car with everything 160g.


Formula 1 Class


Chassis:
PNR 3.0F1, GL Racing GLF, G-Force Formula, MWX FormulaR1 and Atomic MRZ F1
Body:
PN F1 Body #600821 and #600822, GL F1 Body #GLF-S-001and G-Force Formula Body, #ZP06 ZPerformance
F1 Body Set
Grivi-Garage Karoserie Type 1 & 2 body to Formula 1 class
Front Wing and Rear Wing MUST original.
Front bumper ball bearing NOT allowed.
Motor:
PN Brushless Sensored V4 Anima 2500kv #174425, all motor comes with standard
14.5 rotor, and all motor will inspect by motor checker machine, make sure all motor running on same
performance, and all motor will be sealed with security label, if the label removed or broken will be
VOID.
Fixed Gear ratio 64 Pitch 12 Pinion (#416412WC Green or #426412WC Green) / 53T Spur Gear
(#MR2953WC Yellow or #MR2055-T53WC Yellow or #RX2853WC Yellow) ONLY.
ESC:
OPEN any Sensored or Sensorless ESC.
Gyro and Receiver build in Gyro is not allowed.
Battery:
2S Li-Po battery, maximum 8.45V.
Additional battery for transponder allowed.
Option Parts:
Allowed any aftermarket brand production parts for PNR 3.0F1 or GLF or G-Force Formula.
Allowed Z-Performance front bumper (not installed ball bearing) and rear wing.
Allowed Chief Custom Front Wing CC-001 and CC002
NOT Allowed any homemade parts, 3D print option parts and prototype parts.
Wheel:
PN Racing MR2088 (Black) and #MR2089 (Yellow) Machine Cut Delrin Formula Wheel ONLY.
Front Wheel:
#MR2088R0 (Black) #MR2089R0 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 11x20mm
Flanged Wheel.
#MR2088R0-19 Mini-Z 2WD Machine Cut Delrin Formula 11x19mm Flanged Wheel.
Rear Wheel:
#MR2088R14 (Black) #MR2089R14 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 14x20mm
Flanged Wheel R14.
#MR2088R14-19 (Black) #MR2089R14 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 14x19mm
Flanged Wheel R14.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
Whole car with everything 140


GTLM Super Stock Class


Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MR04, Jomurema, GL Racing GLR, GLR-GT GLGTR,
MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRZ Pro MRX, NEXX Specter,
Reflex RX28, G-Force Lightning and MWX R.1
GT Body 90mm-98mm wheel base only.
LM Body 102mm wheel base only.
Body:
Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo R8 911, Silver Horse Audi-R8
Sauber body and PN Racing Concept C9 ABS Body only, Z-Performance ZP08-V1 ZP08-V2 Wing
allowed.
full windshield and window must be installed, except for clearance, Lexan Window and Lexan Roof
with original shape design allowed.
Motor:
PN Brushless Sensored V4 Anima 2500kv #174425, all motor comes with standard
14.5 rotor, and all motor will inspect by motor checker machine, make sure all motor running on same
performance.
The motor will be provided on the first practice day entry fee included one, and each class allows to
purchase an extra one motor.
Fixed Gear ratio 64 Pitch 14 Pinion (#416414WC Orange or #426414WC Red or MR2714WC Brown)
/ 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow or #RX2853WC Yellow) ONLY.
ESC:
OPEN any Sensored or Sensorless ESC.
Gyro and Receiver build in Gyro is not allowed.
Battery:
2S Li-Po battery, maximum 8.45V.
Additional battery for transponder allowed.
Option Parts:
Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts
and prototype parts not allowed.
Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover and front bumper allowed.
Wheel:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width
is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims
must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design
wheel and 3D print wheel not allowed.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
Whole car with everything 160g.


2WD Modified Class


Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MR04, Jomurema, GL Racing GLR GLR-GT GLGTR,
MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRT MRZ Pro MRX, NEXX
Specter, Reflex RX28, G-Force Lightning and MWX R.1
94mm-98mm Wheel Base ONLY, No weight limit.
(Aftermarket chassis TBA, contact philip@pnracing.com to submit your chassis homologation)
Approved Lexan Body:
PN - Supra A90, JGT1, JSK, AD4, GT4LB, 992GT3, M4GT3, Concept C9, V2 JGT01, ZLB.
SBRC - Zenvo ST1, Phenom GT, NSX GT3, 458, SBX, STR, HYR, XBOW2, JX.
Marka - RK-410, RK-408, RK-S, RK-PZR, RK-P-One, RK-W, RK-12, RK-TWR, RK-BLD, RK-NTI, RKHC,
RK-MK4, RK-SP6, 4C.
Atomic - M4Z, DBX, HYP, VST.
P a g e | 8
GL Racing - P1M.
Protoform - P63, Venturi GT.
Rad Body - Mako, Mako X and Catfish.
RTRC - #XVR GTB-98LEX-0.5 XVR-GTB Lexan 98mm Body.
Bittydesign - BDMZ-AS1 Ares-1, BDMZ-CA45, BDMZ-ETR Eptron
XVR - Stability 98mm Body
Sigma RC – SR98_PNWC Body
Hobby Therapy - HT98 Body
Maximum wing 50mm from the ground.
#600630 PN Carbon Wing and #600640 Lexan Wing allowed.
All carbon front bumpers must have a 2mm gap or cushion at the leading edge of the carbon bumper.
(Aftermarket bodies is TBA, contact philip@pnracing.com to submit your bodies sponsor)
Motor:
Open any Mini-Z size motor 130 Brushed or 1525 1626 Brushless, Sensored or Sensorless.
ESC:
Open any ESC Sensored or Sensorless.
Gyro and Receiver build in Gyro is not allowed.
Battery:
2S Li-Po battery.
Additional battery for transponder allowed.
Option Parts:
Any aftermarket brand Mini-Z production parts allowed. Any homemade parts, 3D print option parts
and prototype parts NOT allowed.
Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover and front bumper allowed.
Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum front wheel width is 11mm. Maximum
rear wheel width is 14mm. Maximum wheel diameter is 21mm. All wheel rims must be original design
made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print
wheel NOT allowed.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
No minimum weight limit.


AWD Modified Class


Chassis:
Kyosho Mini-Z Racer AWD MA010, MA015, MA020 and MA030, Atomic BZ and SZ2, GL Racing
GLA, GL GLA Giulia Chassis with 98mm/WB, Mini-Q Q7, RTRC RTB Chassis.
94mm-98mm Wheel Base ONLY, No weight limit.
(Aftermarket chassis TBA, contact philip@pnracing.com to submit your chassis homologation)
Approved Lexan Body:
PN - Supra A90, JGT1, JSK, AD4, GT4LB, 992GT3, M4GT3, Concept C9, V2 JGT01, ZLB.
SBRC - Zenvo ST1, Phenom GT, NSX GT3, 458, SBX, STR, HYR, XBOW2, JX.
Marka - RK-410, RK-408, RK-S, RK-PZR, RK-P-One, RK-W, RK-12, RK-TWR, RK-BLD, RK-NTI, RKHC,
RK-MK4, RK-SP6, 4C.
Atomic - M4Z, DBX, HYP, VST.
GL Racing - P1M.
Protoform - P63, Venturi GT.
Rad Body - Mako, Mako X and Catfish.
RTRC - #XVR GTB-98LEX-0.5 XVR-GTB Lexan 98mm Body.
Bittydesign - BDMZ-AS1 Ares-1, BDMZ-CA45, BDMZ-ETR Eptron
XVR - Stability 98mm Body
Sigma RC – SR98_PNWC Body
Hobby Therapy - HT98 Body
Maximum wing 50mm from the ground.
PN #600630 Carbon Wing and #600640 Lexan Wing allowed.
All carbon front bumpers must have a 2mm gap or cushion at the leading edge of the carbon bumper.
(Aftermarket bodies is TBA, contact philip@pnracing.com to submit your bodies sponsor)
Motor:
Open any Mini-Z size motor 130 Brushed or 1525 1626 Brushless, Sensored or Sensorless.
ESC:
Open any ESC Sensored or Sensorless.
Gyro and Receiver build in Gyro is not allowed.
Battery:
2S Li-Po battery.
Additional battery for transponder allowed.
Option Parts:
Open any parts allowed (including homemade parts, 3D print parts and prototype parts).
Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum
Rear wheel width is 14mm. Maximum wheel diameter is 20.5mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
No minimum weight limit.


Pan Car Open Class


Chassis:
Open any RWD chassis ONLY, 94mm-98mm Wheel Base ONLY.
Body:
MUST be use the following bodies list, allow to cut the rear panel.
#600800 PN Racing Lexan Pan Car Body.
#600810 PN Racing BMR Lexan Pan Car Body.
#600810L PN Racing BMR Lexan Light Weight Version Pan Car Body.
#600819 PN Racing AMR Lexan Pan Car Body.
#600819L PN Racing AMR Lexan Light Weight Version Pan Car Body.
#MRK-8030 Marka RK-AMR.
#MRK-8031 Marka RK-LP1 Pan Car Body
#AMZ-OP011 Atomic MP1.
#SBRC-B011 SBRC Pan Body (Rear Wing must be not higher than the side panel).
#RAD006 Rad Body Skillet.
All carbon front bumpers must have a 2mm gap or cushion at the leading edge of the carbon bumper.
Motor:
Open any Mini-Z size motor 130 Brushed or 1626 Brushless, Sensored or Sensorless.
ESC:
Open any ESC Sensored or Sensorless.
Gyro and Receiver build in Gyro is not allowed.
Battery:
2S Li-Po battery.
Additional battery for transponder allowed.
Option Parts:
Open any parts allowed (including homemade parts, 3D print parts and prototype parts).
Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum
Rear wheel width is 14mm. Maximum wheel diameter is 20mm.
All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.
Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires,
Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT
allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to
any penalties that apply. Please address any questions concerning tire cleaners at the drivers
meeting.
Minimum Weight:
No minimum weight limit.


GENERAL RULES


Each driver maximum 3 classes.
Body Modifications:
 Bodies may be functionally modified with minimal effect external appearance. The following
non-comprehensive list of body modifications are allowed:
The rear bumper may be removed up to Maximum 20mm from the ground.
Wheel wells may be cut forward or backward to accommodate different wheelbase chassis.
Wheel wells may be cut or chamfered internally for tire clearance.
Lower portions of the body may be cut for ground clearance in front, sides or rear.
Body material may be shaved or thinned internally for weight reduction. Technical inspection
officials reserve the right to disqualify any modified body deemed to be too fragile due to
excessive material removal.
Body panels may be reinforced or strengthened internally without affecting external
appearance.
Windshield and windows must be installed, but can be modified by cutting unexposed internal
areas.
Original headlight covers must be installed, but headlight buckets may be removed or omitted.
In the event that a headlight cover is lost, the hole may be covered with a decal.
Taillights and taillight covers may be removed or omitted.
Small body parts such as mirrors, canards, exhausts may be omitted or removed to prevent
racing damage and debris on track.
All plastic bodies rear wing comes with the body may be installed according to the no height
limited. Custom Manufactured wings allow using on the body, according to the height limited
45mm from the ground.
 The above list is non-comprehensive. The purpose and spirit of the rules is to allow functional
performance modifications to the body while preserving the scale appearance and realism.
The technical inspector has final authority in the judgment of body modification legality.
 If you have modified your body and have questions regarding the legality of the modifications,
please submit the body in question to technical inspection PRIOR to racing qualification or
main event round. This is in order to prevent any inadvertent disqualifications. The technical
inspector will judge the legality of body modifications and photograph the body in its legal state
if necessary.
 If the body is further modified post-inspection, the modifications may or may not be legal. For
the racer's protection, please re-submit the body in question to technical inspection
IMMEDIATELY if significant modifications are made.
 If the body is damaged, the condition of the body may or may not be legal. For the racer's
protection, please submit the body in question to technical inspection IMMEDIATELY if
significant damage occurs. If the damaged body is judged illegal, it must be repaired or
replaced for the next qualification or main event round. Qualification or main event results
during which racing damage occurs on track will be allowed, as long as the body is not judged
to be intentionally designed to break away to benefit performance.
Weight, Width & Height Table:
2WD Stock
Class
Formula 1
Class
GTLM Super Stock Class 2WD Mod AWD Mod and
Pan Car Open
Min. Weight 160g 140g 160g No Limit
Max. Wheel Base *98mm 112mm-115mm GT Body
*98mm
LM Body
Must be
102mm
94mm to 98mm
Max. Car Length *180mm Original body
length
*180mm *180mm Subject with Bodies Rule
2WD Mod and AWD Mod
Max. Wing Height 50mm
Max. Car Width * 80mm Original body
width
* 80mm * 80mm
Max. Wing Height * 45mm Original body
height
* 45mm * 45mm
*Original body if no any modify, not apply for this rule.
 All Classes
Drivers may make minor modifications to the body and or chassis to reduce weight. Total
vehicle weight must fall within the guidelines of this document. Please refer to the table above
for weight requirements. The PN Racing directory and race officials reserve the right to
disqualify a body and or chasse for excessive material removal if the body and or chasse is
deemed to be fragile.
Sportsmanship:
Proper manners and good sportsmanship are expected from all drivers at all times. It is important to
understand that general bad behavior like cursing, intentional bad driving, etc. will not be accepted
and can result in a driver being penalized, disqualified or even asked to leave in extreme cases.
All participants will be expected to attend the drivers' meeting. All rules are available online at
www.pnracing.com Drivers will be expected to understand and comply with each rule by the time they
leave the driver's meeting. Ask any questions at this time.
If there is a rules dispute between drivers it must be brought to the attention of the race director or PN
Racing personnel. The officials at the track will do their best to resolve any issue to the satisfaction of
everyone.
If a racer notices an illegal item on another racer's car. Please report to PN Racing official after that
racer's race, so the car can be inspected without interference.
Substitute drivers are not allowed in any qualification or main event race. An immediate
disqualification from the event for both drivers will result.
Jumped starts:
A jumped start is any movement of a vehicle between the time the Starter announces the start time
and the starting signal.
Penalties:
If one or more vehicles jump start, a false start will be declared, and the grid will be re-formed. If the
same vehicle moves first time, it will be moved back the length of the grid from its original starting
position, same car second time will be disqualifying the round.
If a jumped start is not called by the officials immediately at the start of a race but can be verified
afterwards by at least two race officials using any recording device, a ten second penalty will be
added to that offenders’ particular qualifying time or if a main event, a one lap penalty will be
assessed.
Timing System:
If the lap timing system error, that race will be re-schedule race again end of the round.
If transponder not count due to the race, it is driver responsibility, there will be no adjustments after
the race.
Technical Inspections:
All racers are encouraged to bring their cars to the officials during open practice so that any
corrections can be made before the official inspection.
 Before each race
Technical inspections will take place before each race. Inspections will be performed by
PN Racing officials. If the PN Racing official determines that the car does not meet the
requirements specified in this document the car will be deemed illegal and will not be
allowed to race. It will be the responsibility of the driver to ensure that the car meets all
requirements and passes inspection before the race begins. In the event that the PN
Racing official does not catch a violation, the car will still be considered illegal and the
racer will be subject to any consequences of running an illegal car.
 After each race
Cars and radios from each race must be put on the post-race tech table for any post-race
inspection that is required. Drivers that did not finish their race are still subject to this rule.
Inspection of cars will start only after the start of the preceding race (for example,
inspection for race 2 will start after race 1 has started and is underway). Cars on the postrace
tech table will not be released until the end of the following race (for example, cars
that ran in race 2 will be released when race 3 is completed).