Porsche SuperCup / Formula One Race
Second Saturday Of Each Month
Racing will start at 1pm with the Porsche SuperCup Class followed up by Formula One.
Each Class Will Have 2 qualifiers and a Main Event.
Porsche SuperCup Class
PN Racing 2.5 Car Rules
Chassis: PNR2.5W. 98mm wheel base only.
Body: PN Racing 600814 and 600815 Porsche Bodies ONLY.
Motor: PN Brushless Sensorless V4 3500kv #164435.
Fixed Gear ratio 64 Pitch 16 Pinion (#416416WC Blue, #426416WC Blue, #MR2716WC Blue) / 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow or #RX2853WC Yellow) ONLY.
ESC: Kyosho ASF VE VE Pro MR03S RWD and EVO, PN 16A ESC (#500807 and #500807A). Gyro and Receiver build in Gyro is not allowed.
Battery: Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery for transponder allowed.
Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover and front bumper allowed. Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.
Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.
Minimum Weight: Whole car with everything 160g.
Porsche SuperCup
2500kv Lipo
Chassis: Jomurema, GL Racing GLR, GLR-GT GLGTR, MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRZ Pro MRX, NEXX Specter, Reflex RX28, G-Force Lightning and MWX R.1 GT Body 90mm-98mm wheel base only. LM Body 102mm wheel base only.
Body: PN Racing 600814 and 600815 Porsche Bodies ONLY
Motor: Any Brushless Sensored Motor. (2860 kv Max)
Fixed Gear ratio 64 Pitch 11 Pinion 53T Spur Gear ONLY.
ESC: NO TURBO NO BOOST. any Sensored or Sensorless ESC. Gyro and Receiver build in Gyro is not allowed. Battery: 2S Li-Po battery, maximum 8.45V. Additional battery for transponder allowed.
Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover and front bumper allowed.
Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed. Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.
Minimum Weight: Whole car with everything 160g.
Formula One
Chassis: PNR 3.0F1, GL Racing GLF, G-Force Formula, MWX FormulaR1 and Atomic MRZ F1 Body: P age | 5 PN F1 Body #600821 and #600822, GL F1 Body #GLF-S-001and G-Force Formula Body, #ZP06 ZPerformance F1 Body Set Grivi-Garage Karoserie Type 1 & 2 body to Formula 1 class Front Wing and Rear Wing MUST original. Front bumper ball bearing NOT allowed.
Motor: Any Brushless Sensored 2500kv Motor. (2860kv Max
Fixed Gear ratio 64 Pitch 12 Pinion (#416412WC Green or #426412WC Green) / 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow or #RX2853WC Yellow) ONLY.
ESC: OPEN any Sensored or Sensorless ESC. Gyro and Receiver build in Gyro is not allowed. Battery: 2S Li-Po battery, maximum 8.45V. Additional battery for transponder allowed. Option Parts: Allowed any aftermarket brand production parts for PNR 3.0F1 or GLF or G-Force Formula. Allowed Z-Performance front bumper (not installed ball bearing) and rear wing. Allowed Chief Custom Front Wing CC-001 and CC002 NOT Allowed any homemade parts, 3D print option parts and prototype parts.
Wheel: PN Racing MR2088 (Black) and #MR2089 (Yellow) Machine Cut Delrin Formula Wheel ONLY. Front Wheel: #MR2088R0 (Black) #MR2089R0 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 11x20mm Flanged Wheel. #MR2088R0-19 Mini-Z 2WD Machine Cut Delrin Formula 11x19mm Flanged Wheel. Rear Wheel: #MR2088R14 (Black) #MR2089R14 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 14x20mm Flanged Wheel R14. P age | 6 #MR2088R14-19 (Black) #MR2089R14 (Yellow) Mini-Z 2WD Machine Cut Delrin Formula 14x19mm Flanged Wheel R14.
Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.
Minimum Weight: Whole car with everything 140g